HD E30
WiFi 7Long-distance connectivity
TECH SPECSBuy
Overview
| Primary application | Long-range PtP backhaul |
|---|---|
| Wireless technology | WiFi 7 |
| Spatial Diversity | 2x2 MIMO |
| Throughput | 2.3 Gbps+ |
| Link distance | Up to 30 km |
| Network interfaces | 2.5 GbE + 2.5G SFP |
| Weather protection | IP67 |
Radio & Antenna
| Antenna | 30 dBi Dish |
|---|---|
| Channel width | 20 / 40 / 80 / 160 / 320 MHz |
| Operating frequency | 5.18–6.415 GHz or 5.955–7.115 GHz, according to radio version |
| Maximum transmit power | 27 dBm |
| Polarization | Dual linear |
Hardware
| Maximum PHY rate | 5.76 Gbps |
|---|---|
| Operating temperature | −40 to +55°C (radio) |
| Power | PoE 22–56 V / DC 12 V |
| Maximum consumption | <16 W |
| Variants | 5 GHz or 6 GHz radio configuration |
| Processor | Qualcomm quad-core A53 · 1.1 GHz |
| Surge suppression | 8 kV |
| Radio dimensions | 190 × 130 × 70 mm |
| Radio weight | 1.5 kg |
| Mounting | Pole · 30–50 mm diameter |
Networking & Management
| Wireless operating modes | AP WDS · Client WDS |
|---|---|
| Network modes | Bridge · Router |
| Wireless security | WPA-PSK · WPA2-PSK · WPA/WPA2-PSK (AES / TKIP) |
| VLAN | IEEE 802.1Q |
| DHCP | Server · Client |
| Management | HTTP / HTTPS · SNMPv1/v2/v3 · TR-069 · SSH |
PHY rates are theoretical. Actual throughput and range depend on radio configuration and operating conditions. Available frequencies, channel widths and transmit power depend on the country of operation.
STANDARD PACKAGE
In the box
Package configuration for HD E30.
Package contents available on request.
Confirm the supplied mounting and power accessories for your configuration.
Request package detailsPRODUCT PHOTOGRAPHY
HD E30, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for HD E30.
Mounting support
Pole · 30–50 mm diameter
Check your deployment configurationOutdoor Ethernet
Use shielded cabling and weather-sealed connections.
Check your deployment configurationPower supply
PoE 22–56 V / DC 12 V
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for HD E30.
Mount and align
Choose a mounting position with a clear line of sight. Secure the radio and align the directional antenna with the remote site.
Connect the network
Connect an outdoor-rated shielded Ethernet cable and seal exposed connectors.
Connect power
Use the power method listed in the hardware specifications and verify the device label before energizing.
Configure and verify
Set the country, radio mode, frequency and wireless security. Verify alignment and link performance.
HD E30