OUTDOOR X2
WiFi 6Compact outdoor WiFi
Model: OWX-I4O6-E10-25
TECH SPECSBuy
Overview
| Wireless technology | WiFi 6 |
|---|---|
| Radio configuration | Dual-band 2.4 / 5 GHz |
| Maximum radio rates | 574 + 2,402 Mbps |
| Spatial Diversity | 2x2 MIMO |
| Network interfaces | GbE |
| Enclosure / protection | IP67 |
| Model | OWX-I4O6-E10-25 |
Radio & Antenna
| Antenna configuration | Integrated omnidirectional |
|---|---|
| Maximum transmit power | 23 dBm |
Hardware
| Operating temperature | −40 to +60°C |
|---|---|
| Dimensions | Ø120 × 147 mm |
| Weight | 0.8 kg |
| Power | 802.3af/at PoE |
| Maximum consumption | 18 W |
| Mounting | Pole |
| Processor | Qualcomm IPQ5018 + QCN6102 |
| RAM | 512 MB |
| Flash | 16 MB + 128 MB |
| Lightning protection | 6 kV |
| ESD protection | 16 kV |
Networking & Management
| Operating modes | Standalone AP · Controller-managed AP |
|---|---|
| Management | Local web interface · Centralized controller |
PHY rates are theoretical. Actual throughput and range depend on radio configuration and operating conditions. Available frequencies, channel widths and transmit power depend on the country of operation.
STANDARD PACKAGE
In the box
Supplied components for OUTDOOR X2.
OUTDOOR X2 access point×1
Mounting bracket×1
Pole clamps×2
Mounting screwsSet
48 V PoE adapter×1
Quick Setup Guide×1
PRODUCT PHOTOGRAPHY
OUTDOOR X2, in detail.
Explore the original product views.
INSTALLATION ESSENTIALS
Complete the installation.
Connection and mounting requirements for OUTDOOR X2.
Installation support
Suitable mounting support and clearance.
Check your deployment configurationNetwork connection
GbE
Check your deployment configurationPower supply
802.3af/at PoE
Check your deployment configurationINSTALLATION NOTES
Install. Connect. Configure.
Deployment checklist for OUTDOOR X2.
Position the device
Secure the unit on a suitable outdoor support and protect all exposed connections.
Prepare the antennas
Keep the antenna coverage area clear of obstructions.
Connect network and power
Use the documented Ethernet and power interfaces. Verify the supply requirements on the device label.
Configure wireless access
Configure the country, SSIDs, authentication and VLAN settings. Verify coverage with a client device.
OUTDOOR X2